Is there a way to build headless project?

Forum for anything not suitable for the other forums.

Is there a way to build headless project?

Postby mopplayer » Sat Jul 22, 2017 7:41 am

I built offical headless project by using Vivado 2017.2
Makefile
Code: Select all
.PHONY: all clean

all:
   make -C parallella_base/ all
   #make -C headless_e16_z7010/ all
   make -C headless_e16_z7020/ all

clean:
   make -C headless/ clean
   #make -C headless_e16_z7010/ clean
   make -C headless_e16_z7020/ clean



Output: (Many warnings and errors)
error_v.txt
(119.98 KiB) Downloaded 939 times


Is there a support for official project?
How to resolve this?
Thanks a lot.
mopplayer
 
Posts: 4
Joined: Thu Jul 20, 2017 5:32 pm

Re: Is there a way to build headless project?

Postby frankbuss » Thu Aug 17, 2017 10:25 am

It works with Vivado 2015.4 and SDK 2015.4, see http://parallella.org/forums/viewtopic. ... 068#p19457 (no worries, you can install both versions on the same computer, the bloatware needs only 35 GB on your harddisk). See later in this post how I ported the accelerator project to Vivado 2017.2, with a link to my github fork, which has also a modification to access the GPIOs from the Verilog code, which was not part of the original accelerator code.

Shouldn't be too difficult to port the Parallella headless project as well and might be useful. The Vivado GUI is still the same and cumbersome to use, but it looks a bit nicer and the IPs are updated and maybe bugs are fixed.
frankbuss
 
Posts: 14
Joined: Mon Dec 17, 2012 3:22 am


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 13 guests

cron