Re: Is there a way to read bitstream correctly?
Posted:
Thu Jul 20, 2017 6:41 pm
by olajep
The uboot version that ships w/ the Parallella boards requires a raw bitstream
Two options:
i) In Vivado: enable "raw_bitstream" in "Bitstream settings"
or
ii) Use bootgen to extract the raw bitstream from a boot image
See:
https://github.com/parallella/oh/blob/m ... e16_z7010/https://github.com/parallella/oh/blob/m ... uild.sh#L4https://github.com/parallella/oh/blob/m ... it2bin.bif// Ola