Page 1 of 1

where has parallella vivado project been moved in github?

PostPosted: Wed Mar 07, 2018 3:39 pm
by parallella-project
Based on this article :

https://www.parallella.org/2015/03/23/n ... in-vivado/

there was a parallella vivado project in:

https://raw.github.com/parallella/paral ... ss.xpr.zip

and you could open that as fpga design template for your project but apparently this file is no longer available with the mentioned link.
So anybody here know where could I find this file?

Re: where has parallella vivado project been moved in github

PostPosted: Sun Mar 11, 2018 3:08 pm
by peteasa
Hi,
There are several options depending on what you want to do. For example see this thread - viewtopic.php?f=51&t=3297&hilit=disable+epiphany for an empty project with the Epiphany disabled. See 2016.11 branch: https://github.com/olajep/parallella-fpga/tree/2016.11 for a project with Epiphany enabled and not much space left on the fpga for your own work. See https://github.com/parallella/oh for a project with just the link to the Epiphany without the hdmi interfaces.

Have fun!

Peter

Re: where has parallella vivado project been moved in github

PostPosted: Mon Mar 12, 2018 5:14 pm
by parallella-project
Hi,

I want to follow the tutorials provided on http://svenand.blogdrives.com, but they are based on zedboard. Also considering that there is no Parallella board configuration in the board choosing windows when we make a new project in Vivado, I want to know what configuration should I set when making a new project in Vivado to be able to implement our logic in PS, PL or maybe in future in epiphany.
So to make it clear, I want to follow the tutorials in the http://svenand.blogdrives.com that are trying to teach zynq from scratch but they choose zedboard in the make new project window and I'm using Parallella. So what should I do to make the Vivado project suitable for Parallella to implement those zynq project provided on http://svenand.blogdrives.com ?

Best regards

Re: where has parallella vivado project been moved in github

PostPosted: Thu Mar 29, 2018 6:16 am
by Min
peteasa wrote:Hi,
There are several options depending on what you want to do. For example see this thread - viewtopic.php?f=51&t=3297&hilit=disable+epiphany for an empty project with the Epiphany disabled. See 2016.11 branch: https://github.com/olajep/parallella-fpga/tree/2016.11 for a project with Epiphany enabled and not much space left on the fpga for your own work. See https://github.com/parallella/oh for a project with just the link to the Epiphany without the hdmi interfaces.

Have fun!

Peter


Hi Peter,

Is it possible to update parallella-fpga project to use the latest Vivado? It took me several weeks to build 7020_hdmi using Vivado 2015.4, no luck on 7010_hdmi