Hello guys!
I had a previous thread here in regards to getting my power supply up and running out of the box (my parallella now powers on just fine, solid green LED but NO DISPLAY)
Here is a picture of my Parallella in the GeauxRobot Case for Raspberry Pi's, I have a USB Fan attached to the 4-Port USB Hub that I have attached to the Parallella (One Port for Fran, One Port for Mouse, One Port for Keyboard, and One port for my Panda Mini 300mbps Wireless-N dongle, they all seem to be getting power, no response from the keyboard or mouse though.)
I have the Parallella plugged-in to my HD 1920x1080 Dell Monitor via micro-HDMI to HDMI (one cable) (AmazonBasics cable, gold plated)...Even though the Parallella seems to be on, it does not display anything on my monitor at all, nothing comes up, I have tried unplugging everything and just have power and hdmi, and still nothing...Am I missing something? Please help guys! I have been trying for hours to no avail. I do not have ethernet, so no SSHing via ethernet...I do have a USB to UART cable coming in the mail still though to access SSH if needed (But it would be helpful to have a guide of how to get HDMI working if I can get SSH access)...Otherwise I really need to know or figure out how/why it is not displaying via the HDMI port...I used a 32GB Class 10 microSD card and followed the steps to put Ubuntu 14.04 with the Linux Kernal with HDMI Support and FPGA for the 7010 on Windows....Which I believe is setup properly..